PURPOSE
Requirements for anchor devices in personal fall protection systems.
← All PPE standards01 02
SERNEM · Fall protection
EN 795Anchor devices for fall protection
Requirements for anchor devices in personal fall protection systems.
Illustrative image; verify real product conformity from markings and certificates.
TYPICAL USE
Anchorage arrangements with verified installation and load transfer.
WHAT TO LOOK FOR
Check anchor type, structural suitability and manufacturer installation guidance.
TECHNICAL CLASSES AND SELECTION
Technical distinctions within this standard
Do not select PPE by code alone. Verify the following distinctions using actual product markings and manufacturer documentation.
Anchor device
Verify device type, allowed users and installation conditions.
Structural suitability
Assess supporting structure as well as anchor device performance.
Code and marking decoder
EN 795Relevant product standard; confirm applicable edition.
Class / TypeRead product-specific declared performance.
ManufacturerModel, serial, maintenance and traceability.
Where are product markings found?
On anchor device identity marking and installation/inspection records.
Check anchor type, structural suitability and manufacturer installation guidance.
COMPARE STANDARDS
Not interchangeable
An EN 795 anchor device is not an EN 362 connector; they are different components.
WRONG SELECTION
Field mistake
Assuming any metal ring is a certified anchor point.
BETTER APPROACH
Risk-based choice
Have a competent person verify anchor specification, installation and supporting structure.
Typical applications
01 · Fixed anchorage planning
02 · Temporary anchor use
03 · Fall protection systems
1Verify product and standard marking.
2Check protection performance for task hazards.
3Verify anchorage, connectors and body support as one system.
4Review fall clearance, swing-fall risk and rescue plan.
5Verify manufacturer compatibility and periodic inspection.
6Check damage, service life, inspection and manufacturer instructions.