PURPOSE
Product requirements for retractable-type fall arresters.
← All PPE standards01 02
SERNEM · Fall protection
EN 360Retractable type fall arresters
Product requirements for retractable-type fall arresters.
Illustrative image; verify real product conformity from markings and certificates.
TYPICAL USE
Work at height with compatible anchorage and planned clearance.
WHAT TO LOOK FOR
Check markings, anchor orientation, edge-use limits and manufacturer instructions.
TECHNICAL CLASSES AND SELECTION
Technical distinctions within this standard
Do not select PPE by code alone. Verify the following distinctions using actual product markings and manufacturer documentation.
Retractable device
Verify manufacturer limits on horizontal/vertical and edge use.
Fall clearance
Account for device lock-off and clearance.
Code and marking decoder
EN 360Relevant product standard; confirm applicable edition.
Class / TypeRead product-specific declared performance.
ManufacturerModel, serial, maintenance and traceability.
Where are product markings found?
On device casing, serial marking and manufacturer instructions.
Check markings, anchor orientation, edge-use limits and manufacturer instructions.
COMPARE STANDARDS
Not interchangeable
EN 360 is a fall arrester, not an EN 361 full-body harness or EN 795 anchor.
WRONG SELECTION
Field mistake
Using a device near a roof edge without verified edge suitability.
BETTER APPROACH
Risk-based choice
Review product marking, edge tests, anchorage direction and rescue plan against manufacturer instructions.
Typical applications
01 · Work-at-height maintenance
02 · Roof access
03 · Vertical access
1Verify product and standard marking.
2Check protection performance for task hazards.
3Verify anchorage, connectors and body support as one system.
4Review fall clearance, swing-fall risk and rescue plan.
5Verify manufacturer compatibility and periodic inspection.
6Check damage, service life, inspection and manufacturer instructions.