01
Purpose
EN 812:2012 covers industrial bump caps intended to protect against striking the head on hard stationary objects and resulting superficial injuries. It is not a substitute for an EN 397 helmet against falling or thrown objects.
Head ProtectionTECHNICAL PPE LIBRARY
EN 812
Industrial Bump Cap Standard
EN 812:2012 covers industrial bump caps intended to protect against striking the head on hard stationary objects and resulting superficial injuries. It is not a substitute for an EN 397 helmet against falling or thrown objects.
Product type
Industrial bump cap
Field focus
Code + product + conditions of use
TECHNICAL PRODUCT IDENTITY
EN 812
EN 812StandardSIZESizeAlways verify the actual product label, manufacturer technical documentation and conformity markings.
02
Typical use
Warehouses, maintenance, low-clearance indoor areas and tasks with bump hazards but no falling-object hazard.
03
What to look for?
Check EN 812 marking, size range and manufacturer information; where falling-object risk exists select an appropriate industrial helmet instead of a bump cap.
CLASSES & SELECTION LOGIC
Technical classes in this standard
A class code is not a selection decision by itself. Interpret it together with task-specific risk assessment and manufacturer data.
BUMP
Bump protection
Designed to reduce superficial injury from striking the head on hard stationary objects.
NOT HELMET
Not a safety helmet
Does not replace EN 397 protection against falling/thrown objects.
READ THE PRODUCT LABEL
Code & marking decoder
EN 812StandardIndustrial bump-cap standard.SIZESizeWearer size range.
READ THE PRODUCT IN THE FIELD
Where is the standard marking found?
Location varies by manufacturer and design. These are the first places to check; final verification must use the actual product and manufacturer documentation.
1
EN 812 and size label inside cap
The marking should be legible, durable and match the product.
STANDARD FAMILY
Standards often reviewed together
EN 812:2012Industrial bump caps
EN 397Industrial helmet for falling-object/impact hazards
COMMONLY CONFUSED
They are not the same thing
Bump cap ≠ safety helmet
EN 812 addresses head bumps against stationary objects, not falling-object protection.
WRONG-SELECTION EXAMPLE
A typical field mistake
Using a bump cap where materials can fall from above.
Why is this a problem?
EN 812 does not replace a safety helmet for this hazard.
Better approach
Verify appropriate EN 397/task-specific helmet requirement for falling-object risk.
WHERE IN THE FIELD?
Typical applications
01
Warehousing
02
Maintenance
03
Low-clearance areas
HSE FIELD CHECK
30-second field check
Use for quick pre-checks. It does not replace certification, competent inspection or task-specific risk assessment.
CHECK FOCUS
Is shell/insert cracked or deformed?
CRITICAL MISTAKE
Using a bump cap where materials can fall from above.
BETTER APPROACH
Verify appropriate EN 397/task-specific helmet requirement for falling-object risk.
1
Is shell/insert cracked or deformed?
2
Does cap fit correctly?
3
Is there a falling-object hazard on the task?
RELATED SERNEM RESOURCES