PURPOSE
Protective clothing offering limited protection against liquid chemicals.
← All PPE standards01 02
SERNEM · Protective clothing
EN 13034Type 6 limited chemical splash clothing
Protective clothing offering limited protection against liquid chemicals.
Illustrative image; verify real product conformity from markings and certificates.
TYPICAL USE
Tasks with assessed limited liquid splash risks.
WHAT TO LOOK FOR
Check Type 6 marking; do not interpret as full chemical barrier protection.
TECHNICAL CLASSES AND SELECTION
Technical distinctions within this standard
Do not select PPE by code alone. Verify the following distinctions using actual product markings and manufacturer documentation.
Type 6
Clothing for limited liquid-chemical splash exposure.
Partial body PB[6]
Partial-body protection is not the same as a full-body suit.
Code and marking decoder
EN 13034Relevant product standard; confirm applicable edition.
Class / TypeRead product-specific declared performance.
ManufacturerModel, serial, maintenance and traceability.
Where are product markings found?
Type 6 or PB[6] label and manufacturer documentation.
Check Type 6 marking; do not interpret as full chemical barrier protection.
COMPARE STANDARDS
Not interchangeable
Type 6 offers limited protection and is not equivalent to EN 14605 Type 3/4.
WRONG SELECTION
Field mistake
Using only Type 6 garments where strong liquid jets are possible.
BETTER APPROACH
Risk-based choice
Escalate protection using SDS, exposure route, splash severity and product chemical-resistance claims.
Typical applications
01 · Limited splash tasks
02 · Controlled chemical handling
03 · Liquid exposure assessment
1Verify product and standard marking.
2Check protection performance for task hazards.
3Check interfaces between clothing, gloves, boots and respirator.
4Inspect seams, closures, tape and contamination or damage.
5Match chemical/particulate exposure with declared protection type.
6Check damage, service life, inspection and manufacturer instructions.