PURPOSE
Requirements for full-body chemical protective clothing against airborne solid particulates.
← All PPE standards01 02
SERNEM · Protective clothing
EN ISO 13982-1Type 5 solid particle protective clothing
Requirements for full-body chemical protective clothing against airborne solid particulates.
Illustrative image; verify real product conformity from markings and certificates.
TYPICAL USE
Tasks involving assessed airborne solid-particle exposures.
WHAT TO LOOK FOR
Check Type 5 marking, closures and compatibility with other PPE.
TECHNICAL CLASSES AND SELECTION
Technical distinctions within this standard
Do not select PPE by code alone. Verify the following distinctions using actual product markings and manufacturer documentation.
Type 5
Specified full-body protection against airborne solid particulates.
Interface integrity
Fit at hood, wrists, ankles and interfaces is important.
Code and marking decoder
EN ISO 13982-1Relevant product standard; confirm applicable edition.
Class / TypeRead product-specific declared performance.
ManufacturerModel, serial, maintenance and traceability.
Where are product markings found?
Type 5 statement on garment label and user instructions.
Check Type 5 marking, closures and compatibility with other PPE.
COMPARE STANDARDS
Not interchangeable
Type 5 is not a substitute for Type 3/4 liquid chemical protection.
WRONG SELECTION
Field mistake
Using a particle suit against pressurized liquid chemical spray.
BETTER APPROACH
Risk-based choice
Match chemical physical state, exposure route and manufacturer test information.
Typical applications
01 · Particulate cleanup
02 · Dusty maintenance
03 · Controlled dusty operations
1Verify product and standard marking.
2Check protection performance for task hazards.
3Check interfaces between clothing, gloves, boots and respirator.
4Inspect seams, closures, tape and contamination or damage.
5Match chemical/particulate exposure with declared protection type.
6Check damage, service life, inspection and manufacturer instructions.