←Back to Dashboard
← Toolbox Library
SERNEM Toolbox● Ready8–10 MINUTES

STORED PRESSURE RELEASE AND ZERO-ENERGY TOOLBOX TALK

Verify zero pressure before opening equipment.

Checking account…
← Back to Toolbox Library

Preview is public. A free SERNEM account is required to download the standard PDF.

Toolbox Topic

STORED PRESSURE RELEASE AND ZERO-ENERGY TOOLBOX TALK

Duration

8–10 MINUTES

Date

Site / Area

Supervisor

Company

Participants

Document No

OBJECTIVE

✓

Prevent uncontrolled release of residual pressure before opening piping, hoses, vessels or equipment.

TOPIC EXPLANATION

✓

A closed valve or stopped pump does not prove zero pressure. Fluids and gases can remain pressurised in trapped sections.

✓

Isolation, controlled venting or draining and verification must follow an approved procedure.

✓

Discharge routes must be safe. Assess the substance, temperature and environmental consequences before releasing contents.

REALISTIC SITE SCENARIO

✓

A crew planned to disconnect a hose after closing the supply valve.

✓

Residual pressure ejected fluid and exposed nearby personnel.

✓

Controlled venting and verified zero pressure would have prevented the release.

REMEMBER

✓

A shut valve is not proof of zero pressure. Verify isolation and depressurisation before opening.

KEY HAZARDS

✓

High-pressure liquid spray.

✓

Sudden compressed-gas release.

✓

Ejected connection components.

✓

Burns from hot fluids.

✓

Hazardous chemical exposure.

✓

Unsafe discharge to drains.

✓

Trapped pressure in dead legs.

✓

Misleading pressure gauge reading.

CONTROL MEASURES

✓

Use the approved opening procedure.

✓

Identify all pressure sources.

✓

Verify isolation locations.

✓

Apply authorised energy isolation.

✓

Route discharge to a safe location.

✓

Assess chemical and thermal hazards.

✓

Verify zero pressure using suitable means.

✓

Assess trapped pockets separately.

✓

Remain clear of the release path.

✓

Stop and consult the responsible specialist.

SUPERVISOR TALKING SCRIPT

✓

Closed valves do not guarantee that pressure is gone. Before any break in containment, we will isolate, vent safely and verify zero energy.

DISCUSSION QUESTIONS

✓

Where can pressure remain trapped?

✓

Which isolations are required?

✓

Where will discharge go?

✓

How is zero pressure verified?

✓

What substance is contained?

PRE-WORK VERIFICATION

✓

Procedure approved

✓

Pressure sources mapped

✓

Isolations checked

✓

Locks applied

✓

Discharge route safe

✓

Substance identified

✓

Temperature checked

✓

Gauge suitable

✓

Trapped sections reviewed

✓

Crew briefed

ATTENDANCE AND APPROVAL

✓

Project / Site

✓

Date

✓

Presented by

✓

Work area

Attendance and Signature

#NamePositionSignature
1
2
3
4
5
6
7
8
9
10
11
12

Supervisor Signature

HSE Approval

SERNEM HSE Resource — Approved site procedure, risk assessment, manufacturer instructions and local regulations take priority.