←Back to Dashboard
← Toolbox Library
SERNEM Toolbox● Ready8–10 MINUTES

ELECTRICAL ARC FLASH AND APPROACH BOUNDARIES TOOLBOX TALK

Separate arc hazards from electrical shock limits.

Checking account…
← Back to Toolbox Library

Preview is public. A free SERNEM account is required to download the standard PDF.

Toolbox Topic

ELECTRICAL ARC FLASH AND APPROACH BOUNDARIES TOOLBOX TALK

Duration

8–10 MINUTES

Date

Site / Area

Supervisor

Company

Participants

Document No

OBJECTIVE

✓

Prevent serious injury from arc flash and electric shock when working near energised equipment.

TOPIC EXPLANATION

✓

Arc flash can cause severe heat and pressure without direct contact. Shock approach boundaries and arc flash boundaries protect against different hazards.

✓

A qualified assessment of the task and equipment must determine safe limits and protective equipment.

✓

Energised work is not the default option. First consider safe de-energisation and verified electrical isolation.

REALISTIC SITE SCENARIO

✓

A maintenance worker performed nearby work beside an open electrical enclosure.

✓

Without a defined boundary, an unauthorised person walked close to the exposed equipment.

✓

Task-specific hazard assessment, barriers and access control would have reduced the risk.

REMEMBER

✓

Never enter a defined arc or shock boundary without authorisation and appropriate controls.

KEY HAZARDS

✓

Severe thermal burns from an arc.

✓

Electric shock from live conductors.

✓

Pressure effects of an arc event.

✓

Ejected hot metal particles.

✓

Wrong approach distances.

✓

Inadequate face protection.

✓

Unauthorised panel opening.

✓

Incorrect assumption of isolation.

CONTROL MEASURES

✓

Consider de-energised working first.

✓

Review the qualified hazard assessment.

✓

Identify shock and arc boundaries separately.

✓

Install suitable barriers and warnings.

✓

Restrict entry to authorised personnel.

✓

Check equipment labels and condition.

✓

Select rated arc PPE for the actual task.

✓

Verify electrical isolation arrangements.

✓

Plan emergency response and contact.

✓

Stop work if conditions change.

SUPERVISOR TALKING SCRIPT

✓

Arc flash and electrical shock need different control boundaries. Competent electrical staff will define the area. No one enters without the correct permission and protection.

DISCUSSION QUESTIONS

✓

Is the equipment energised?

✓

Who assessed the arc boundary?

✓

Where is the shock limit?

✓

Who can enter the work area?

✓

Can the task be de-energised?

PRE-WORK VERIFICATION

✓

Electrical status known

✓

Risk assessment ready

✓

Arc boundary marked

✓

Shock boundary marked

✓

Access restricted

✓

Warnings installed

✓

PPE suitable

✓

Isolation reviewed

✓

Emergency plan available

✓

Crew briefed

ATTENDANCE AND APPROVAL

✓

Project / Site

✓

Date

✓

Presented by

✓

Work area

Attendance and Signature

#NamePositionSignature
1
2
3
4
5
6
7
8
9
10
11
12

Supervisor Signature

HSE Approval

SERNEM HSE Resource — Approved site procedure, risk assessment, manufacturer instructions and local regulations take priority.