←Back to Dashboard
← Toolbox Library
SERNEM Toolbox● Ready8–10 MINUTES

MANUAL CHAIN AND LEVER HOIST SAFETY TOOLBOX TALK

Control anchor strength, rated load and chain movement.

Checking account…
← Back to Toolbox Library

Preview is public. A free SERNEM account is required to download the standard PDF.

Toolbox Topic

MANUAL CHAIN AND LEVER HOIST SAFETY TOOLBOX TALK

Duration

8–10 MINUTES

Date

Site / Area

Supervisor

Company

Participants

Document No

OBJECTIVE

✓

Prevent overload, anchor failure and crushing injuries during manual chain or lever hoist operations.

TOPIC EXPLANATION

✓

The rated capacity of the hoist, anchor and every connection must suit the load and pull direction.

✓

Inspect chain, hooks, latches, body and braking functions before use. Remove damaged equipment from service.

✓

Plan communication, load travel and escape zones. Nobody should stand beneath the load or in the pull path.

REALISTIC SITE SCENARIO

✓

A crew used a lever hoist to align a heavy component.

✓

A temporary anchor was unsuitable for the pull direction and loosened during movement.

✓

Approved anchor capacity and controlled movement would have reduced the hazard.

REMEMBER

✓

A good hoist with an unsuitable anchor is an unsafe lifting system.

KEY HAZARDS

✓

Hoist rated capacity exceeded.

✓

Anchor point failure.

✓

Damaged chain or hook.

✓

Uncontrolled load movement.

✓

Hands trapped by chain.

✓

Personnel below the load.

✓

Side loading of equipment.

✓

Hoist brake malfunction.

CONTROL MEASURES

✓

Verify load weight and direction.

✓

Check hoist rated capacity.

✓

Confirm anchor rating and direction.

✓

Inspect chain and hooks.

✓

Check hook safety latches.

✓

Verify brake and equipment condition.

✓

Prevent unapproved side loading.

✓

Keep personnel clear of loads.

✓

Move the load gradually.

✓

Quarantine defective hoists.

SUPERVISOR TALKING SCRIPT

✓

The hoist rating is not the whole system rating. Confirm the anchor, chain, hook and travel path before moving the load.

DISCUSSION QUESTIONS

✓

What is the load mass?

✓

Is the anchor suitable?

✓

Do hooks latch securely?

✓

Who is in the pull path?

✓

Who isolates a damaged hoist?

PRE-WORK VERIFICATION

✓

Load mass known

✓

Capacity suitable

✓

Anchor rated

✓

Chain inspected

✓

Hooks inspected

✓

Latches working

✓

Brake checked

✓

Pull direction safe

✓

Load path clear

✓

Crew briefed

ATTENDANCE AND APPROVAL

✓

Project / Site

✓

Date

✓

Presented by

✓

Work area

Attendance and Signature

#NamePositionSignature
1
2
3
4
5
6
7
8
9
10
11
12

Supervisor Signature

HSE Approval

SERNEM HSE Resource — Approved site procedure, risk assessment, manufacturer instructions and local regulations take priority.