EXCAVATOR SWING ZONE AND PEDESTRIAN SAFETY TOOLBOX TALK
Keep clear of slew radius and blind spots.
Preview is public. A free SERNEM account is required to download the standard PDF.
Toolbox Topic
EXCAVATOR SWING ZONE AND PEDESTRIAN SAFETY TOOLBOX TALK
Duration
8–10 MINUTES
Date
Site / Area
Supervisor
Company
Participants
Document No
OBJECTIVE
Prevent pedestrian strikes and crushing around excavator slewing, counterweight and bucket movements.
TOPIC EXPLANATION
An excavator counterweight can extend into nearby pedestrian routes as the upper body slews. Operators cannot always see every blind spot.
Physically separate the operating zone based on machine reach and slew radius. Agree on signals and spotter arrangements.
Anyone needing access must wait for the machine to stop and receive clear permission from the operator.
REALISTIC SITE SCENARIO
A worker tried to cross behind an operating excavator.
The upper structure swung and the counterweight entered the pedestrian path.
A marked pedestrian route and verified stop-and-approach rule would have prevented exposure.
REMEMBER
Do not assume the operator has seen you. Never enter the swing zone without permission.
KEY HAZARDS
Crushing by the counterweight.
Contact with boom or bucket.
Pedestrians in blind spots.
Crushing during reversing.
Materials inside the slew radius.
Machine instability near voids.
Unclear spotter instructions.
Unauthorised approach to equipment.
CONTROL MEASURES
Define the operating limits.
Barricade the slew radius.
Provide separate pedestrian paths.
Review the operator's visibility.
Use a competent spotter when needed.
Agree radio or hand signals.
Prevent unauthorised entry.
Stop machinery before approach.
Assess ground and edge clearance.
Keep the swing zone clear of storage.
SUPERVISOR TALKING SCRIPT
The rear counterweight is also a dangerous moving part. Nobody takes shortcuts through the excavator operating zone. Stop the machine before approaching.
DISCUSSION QUESTIONS
Where is the swing radius?
Where do pedestrians walk?
Can the operator see me?
Who is the spotter?
What is the approach rule?
PRE-WORK VERIFICATION
Operating area mapped
Swing zone secured
Pedestrian route open
Blind spots assessed
Spotter assigned
Signals agreed
Access restricted
Stop rule briefed
Ground checked
Storage clear
ATTENDANCE AND APPROVAL
Project / Site
Date
Presented by
Work area
Attendance and Signature
| # | Name | Position | Signature |
|---|---|---|---|
| 1 | |||
| 2 | |||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| 7 | |||
| 8 | |||
| 9 | |||
| 10 | |||
| 11 | |||
| 12 |
Supervisor Signature
HSE Approval
SERNEM HSE Resource — Approved site procedure, risk assessment, manufacturer instructions and local regulations take priority.