Safety PacksAI Assistant
← Risk Assessment Generator
Ready Risk AssessmentWork at Height9 Hazards

Roofing Work Risk Assessment

Review the critical hazards, potential consequences, persons at risk and recommended control measures for Roofing Work in one professional HSE workspace.

9
Ready Hazards
Activity-specific HSE risk library
5×5
Risk Matrix
Ready for professional risk evaluation
TR / EN
Bilingual
Turkish and English HSE content
HSE Risk Library

Roofing Work Hazards & Controls

Review the key hazards, consequences and control measures for Roofing Work in a structured professional HSE format.

01
Hazard

Fall from roof edge

Potential Consequence

Serious injury or fatality

Persons at Risk

Roof workers

Existing Controls

Edge protection, safe access and suitable fall protection

Additional Controls

Verify open edges and openings before each shift

02
Hazard

Falling roofing materials

Potential Consequence

Struck-by or serious injury

Persons at Risk

Workers below

Existing Controls

Material securing and exclusion zone below

Additional Controls

Secure lightweight materials against wind

03
Hazard

Hot surface or bitumen

Potential Consequence

Burn injury

Persons at Risk

Roofing workers

Existing Controls

Suitable equipment and thermal protection

Additional Controls

Control hot-material handling and pouring areas

04
Hazard

Fall from roof edge

Potential Consequence

Serious injury or fatality

Persons at Risk

Roof workers

Existing Controls

Edge protection and fall protection

Additional Controls

Verify all open edges and access points before work

05
Hazard

Fragile roofing material

Potential Consequence

Fall through roof

Persons at Risk

Roof workers

Existing Controls

Walkways and fragile-area marking

Additional Controls

Use suitable crawling boards or platforms over fragile surfaces

06
Hazard

Roofing materials blown by wind

Potential Consequence

Dropped object or loss of balance

Persons at Risk

Roof workers and personnel below

Existing Controls

Material securing and weather monitoring

Additional Controls

Secure lightweight materials and reassess work when wind increases

07
Hazard

Roofing materials stored near roof edge

Potential Consequence

Dropped material or loss of worker balance

Persons at Risk

Workers performing the activity and nearby personnel

Existing Controls

Authorized personnel, pre-work checks, suitable equipment and site procedures

Additional Controls

Store materials securely at a safe distance from roof edges

08
Hazard

Open penetration during roofing work

Potential Consequence

Serious injury or fatality from falling through an opening

Persons at Risk

Workers performing the activity and nearby personnel

Existing Controls

Authorized personnel, pre-work checks, suitable equipment and site procedures

Additional Controls

Protect openings using secure covers or suitable guardrail systems

09
Hazard

Strong wind during roofing work

Potential Consequence

Loss of balance or materials becoming airborne

Persons at Risk

Workers performing the activity and nearby personnel

Existing Controls

Authorized personnel, pre-work checks, suitable equipment and site procedures

Additional Controls

Monitor wind conditions and stop work when safe operating limits are exceeded

Related Risk Assessments

More from Work at Height

Explore related activities, hazards and control measures from the same HSE risk category.

Explore Risk Library →
SERNEM

Turn this into your project risk assessment

Use these ready hazards as your starting point, customize controls, evaluate risk levels and prepare your project-specific assessment in SERNEM.

Start Risk Assessment
SERNEM
Roofing Work RISK ASSESSMENT
SRN-HIRARC
Revision: 1.0
ACTIVITYRoofing WorkCATEGORYWork at Height
#ActivityHazardConsequencePersons at RiskExisting Risk ControlLSRiskAction Required / Additional ControlsPerson in ChargeDue DateRLRSResidual Risk
01Roofing WorkFall from roof edgeSerious injury or fatalityRoof workersEdge protection, safe access and suitable fall protection2510
High
Verify open edges and openings before each shift--224
Low
02Roofing WorkFalling roofing materialsStruck-by or serious injuryWorkers belowMaterial securing and exclusion zone below248
Medium
Secure lightweight materials against wind--122
Low
03Roofing WorkHot surface or bitumenBurn injuryRoofing workersSuitable equipment and thermal protection236
Medium
Control hot-material handling and pouring areas--122
Low
04Roofing WorkFall from roof edgeSerious injury or fatalityRoof workersEdge protection and fall protection2510
High
Verify all open edges and access points before work--224
Low
05Roofing WorkFragile roofing materialFall through roofRoof workersWalkways and fragile-area marking236
Medium
Use suitable crawling boards or platforms over fragile surfaces--122
Low
06Roofing WorkRoofing materials blown by windDropped object or loss of balanceRoof workers and personnel belowMaterial securing and weather monitoring339
Medium
Secure lightweight materials and reassess work when wind increases--122
Low
07Roofing WorkRoofing materials stored near roof edgeDropped material or loss of worker balanceWorkers performing the activity and nearby personnelAuthorized personnel, pre-work checks, suitable equipment and site procedures236
Medium
Store materials securely at a safe distance from roof edges--122
Low
08Roofing WorkOpen penetration during roofing workSerious injury or fatality from falling through an openingWorkers performing the activity and nearby personnelAuthorized personnel, pre-work checks, suitable equipment and site procedures2510
High
Protect openings using secure covers or suitable guardrail systems--224
Low
09Roofing WorkStrong wind during roofing workLoss of balance or materials becoming airborneWorkers performing the activity and nearby personnelAuthorized personnel, pre-work checks, suitable equipment and site procedures236
Medium
Monitor wind conditions and stop work when safe operating limits are exceeded--122
Low
Prepared By
Name / Signature / Date
Reviewed By
Name / Signature / Date
Approved By
Name / Signature / Date
SERNEM • Professional Risk AssessmentWork should not begin until required controls are implemented.