←Back to Dashboard
← Toolbox Library
SERNEM Toolbox● Ready8–10 MINUTES

HYDRAULIC JACKS AND LOAD SUPPORT SAFETY TOOLBOX TALK

Control raised-load collapse and crushing hazards.

Capacity, lifting points, ground, secondary supports and pinch zones.

Checking account…
← Back to Toolbox Library

Preview is public. A free SERNEM account is required to download the standard PDF.

Toolbox Topic

HYDRAULIC JACKS AND LOAD SUPPORT SAFETY TOOLBOX TALK

Duration

8–10 MINUTES

Date

Site / Area

Supervisor

Company

Participants

Document No

OBJECTIVE

✓

Prevent crushing from jack failure, slipping or inadequate support when lifting and working around heavy equipment.

TOPIC EXPLANATION

✓

A hydraulic jack is primarily a lifting device. Unless expressly designed and approved otherwise, it must not be treated as the sole support for personnel working beneath a raised load.

✓

Confirm lifting points, ground bearing, centre of gravity and lateral movement potential within the approved lifting method.

✓

Where access beneath or beside a raised load is necessary, use engineered or manufacturer-approved stands, cribs or other secondary support of adequate capacity.

REALISTIC SITE SCENARIO

✓

A crew raised a heavy item with a hydraulic jack and reached underneath to loosen a connection.

✓

The jack moved sideways slightly on weak ground and the item began to settle.

✓

Rated secondary supports, suitable bearing and keeping hands clear would have prevented a crush incident.

REMEMBER

✓

Never work beneath a load supported only by a jack; verify an approved secondary support arrangement.

KEY HAZARDS

✓

Jack rated capacity exceeded.

✓

Slipping from the designated lifting point.

✓

Soft or sloped ground.

✓

Hydraulic jack failure.

✓

Lateral movement of the load.

✓

Hand or foot entrapment.

✓

Collapse of makeshift stands or cribbing.

✓

Uncoordinated work by multiple people.

CONTROL MEASURES

✓

Plan lifting and support with a competent person.

✓

Verify load mass and jack rating.

✓

Assess contact points and ground bearing.

✓

Inspect the jack for faults or leaks.

✓

Control centre of gravity and lateral movement.

✓

Keep hands and feet away from crushing zones.

✓

Provide rated engineered secondary supports.

✓

Transfer load to supports carefully and evenly.

✓

Work beneath a load only with verified safe support.

✓

Stop for leaks, slipping or unusual movement.

SUPERVISOR TALKING SCRIPT

✓

A jack lifts the load, but is not automatically a safe work support. Before anyone reaches underneath, check rated secondary supports and stable load transfer.

DISCUSSION QUESTIONS

✓

What is the load mass and jack capacity?

✓

Is ground bearing adequate?

✓

Can the load slide sideways?

✓

Where are the secondary supports?

✓

When must we stop?

PRE-WORK VERIFICATION

✓

Method approved

✓

Load mass known

✓

Jack rating sufficient

✓

Ground assessed

✓

Lifting points correct

✓

Jack inspected

✓

Pinch zone clear

✓

Secondary support ready

✓

Load stability verified

✓

Crew briefed

ATTENDANCE AND APPROVAL

✓

Project / Site

✓

Date

✓

Presented by

✓

Work area

Attendance and Signature

#NamePositionSignature
1
2
3
4
5
6
7
8
9
10
11
12

Supervisor Signature

HSE Approval

SERNEM HSE Resource — Task-specific risk assessment, authorised procedures, manufacturer instructions and local law take precedence.