←Back to Dashboard
← Toolbox Library
SERNEM Toolbox● Ready8–10 MINUTES

FORMWORK AND PRE-POUR INSPECTION TOOLBOX TALK

Prevent formwork instability during concrete placing.

Checking account…
← Back to Toolbox Library

Preview is public. A free SERNEM account is required to download the standard PDF.

Toolbox Topic

FORMWORK AND PRE-POUR INSPECTION TOOLBOX TALK

Duration

8–10 MINUTES

Date

Site / Area

Supervisor

Company

Participants

Document No

OBJECTIVE

✓

Prevent collapse, falls and crush injuries caused by inadequate formwork or temporary supports during concrete pouring.

TOPIC EXPLANATION

✓

Fresh concrete creates significant loads on forms and supports. Pour rate, height and sequence influence stability.

✓

Competent personnel must inspect forms, ties, props, bearing points and platforms against the approved design.

✓

Stop pouring and clear the danger area if unusual movement, leakage or settlement is observed.

REALISTIC SITE SCENARIO

✓

A crew poured concrete into a tall wall form.

✓

A loose connection caused signs of movement, but pouring continued.

✓

Pre-pour checks, controlled placing rate and prompt stop-work would have prevented exposure.

REMEMBER

✓

Do not pour without approved formwork inspection. Stop immediately for deformation.

KEY HAZARDS

✓

Form tie connection failure.

✓

Collapse of temporary props.

✓

Sudden release of wet concrete.

✓

Falls from placing platforms.

✓

Concrete pump hose movement.

✓

Unplanned concentrated loads.

✓

Insufficient ground bearing.

✓

Failure to notice settlement.

CONTROL MEASURES

✓

Review the approved formwork design.

✓

Inspect ties and props.

✓

Verify bearing points and ground.

✓

Follow the specified pour sequence.

✓

Control pour rate and loading.

✓

Provide safe platforms and edge guards.

✓

Plan pump hose movement.

✓

Appoint a formwork observer.

✓

Monitor settlement and movement.

✓

Stop for abnormal deformation.

SUPERVISOR TALKING SCRIPT

✓

No concrete will be poured without approved formwork checks. Follow the specified placing rate and stop immediately if the form moves or settles.

DISCUSSION QUESTIONS

✓

Who approved the formwork?

✓

Are props inspected?

✓

What pour rate is permitted?

✓

Who monitors movement?

✓

Who gives the stop command?

PRE-WORK VERIFICATION

✓

Design approved

✓

Ties inspected

✓

Props suitable

✓

Ground checked

✓

Pour sequence known

✓

Loading controlled

✓

Platform safe

✓

Pump plan ready

✓

Observer assigned

✓

Stop rule understood

ATTENDANCE AND APPROVAL

✓

Project / Site

✓

Date

✓

Presented by

✓

Work area

Attendance and Signature

#NamePositionSignature
1
2
3
4
5
6
7
8
9
10
11
12

Supervisor Signature

HSE Approval

SERNEM HSE Resource — Approved site procedure, risk assessment, manufacturer instructions and local regulations take priority.