←Back to Dashboard
← Toolbox Library
SERNEM Toolbox● Ready8–10 MINUTES

MEWP PRE-USE CHECKS AND EMERGENCY LOWERING TOOLBOX TALK

Control platform entrapment, overturning and rescue delays.

Operator competence, ground stability, overhead hazards and rescue readiness.

Checking account…
← Back to Toolbox Library

Preview is public. A free SERNEM account is required to download the standard PDF.

Toolbox Topic

MEWP PRE-USE CHECKS AND EMERGENCY LOWERING TOOLBOX TALK

Duration

8–10 MINUTES

Date

Site / Area

Supervisor

Company

Participants

Document No

OBJECTIVE

✓

Prevent entrapment, overturning, falls and delayed rescue during mobile elevating work platform operations.

TOPIC EXPLANATION

✓

A MEWP basket may trap an operator against overhead steelwork or pipework. Contact with platform controls during entrapment can worsen the incident.

✓

Assess bearing capacity, slopes, wind, working height and the machine's reach configuration before starting. Controls and protective systems vary by model.

✓

A trained person on the ground must be able to operate the machine-specific emergency lowering system under a practical site rescue plan.

REALISTIC SITE SCENARIO

✓

An articulated platform was raised beneath a pipe rack without identifying an overhead beam.

✓

The worker became exposed to crushing between the basket rail and the beam; the crew below did not know the emergency descent controls.

✓

A planned approach path, overhead clearance checks and practised lowering arrangements would have improved prevention and response.

REMEMBER

✓

Check overhead clearance and emergency lowering before lifting the platform; do not begin without rescue capability.

KEY HAZARDS

✓

Crushing between basket and overhead structures.

✓

Overturning due to unsuitable ground.

✓

Falls from leaning outside the platform.

✓

Exceeding wind, reach or stability limits.

✓

Collision with vehicles or pedestrians.

✓

Unknown or inaccessible emergency lowering controls.

✓

Defective guardrails, alarms or controls.

✓

Insufficient model-specific familiarisation.

CONTROL MEASURES

✓

Select the correct MEWP and verify operator competence.

✓

Complete pre-use inspection and safety function checks.

✓

Assess ground strength, slopes, voids and trenches.

✓

Identify overhead structures, power lines and entrapment points.

✓

Comply with manufacturer load, outreach, slope and wind limits.

✓

Separate pedestrians and vehicles from the operating area.

✓

Select fall protection for the MEWP type and task risk.

✓

Nominate a trained, available emergency lowering person.

✓

Brief and appropriately practise the rescue procedure.

✓

Lower safely and stop if site conditions change.

SUPERVISOR TALKING SCRIPT

✓

We will assess the machine, ground and overhead clearance, not just the work height. Everyone must know who can operate emergency lowering from the ground and how to summon help.

DISCUSSION QUESTIONS

✓

Where are the overhead entrapment points?

✓

Has ground suitability been confirmed?

✓

Who can operate emergency lowering?

✓

What is the platform's wind limit?

✓

What happens if communications fail?

PRE-WORK VERIFICATION

✓

Operator competent

✓

Pre-use check completed

✓

Ground assessed

✓

Overhead hazards checked

✓

Area segregated

✓

Load and wind limits suitable

✓

Fall protection assessed

✓

Ground rescue person available

✓

Rescue procedure briefed

✓

Crew informed

ATTENDANCE AND APPROVAL

✓

Project / Site

✓

Date

✓

Presented by

✓

Work area

Attendance and Signature

#NamePositionSignature
1
2
3
4
5
6
7
8
9
10
11
12

Supervisor Signature

HSE Approval

SERNEM HSE Resource — Task-specific risk assessment, authorised procedures, manufacturer instructions and local law take precedence.