←Back to Dashboard
← Toolbox Library
SERNEM Toolbox● Ready8–10 MINUTES

INDUSTRIAL RADIOGRAPHY (NDT) EXCLUSION ZONE TOOLBOX TALK

Prevent unauthorised access and ionising-radiation exposure.

Authorised crew, controlled areas, barriers, communications and emergencies.

Checking account…
← Back to Toolbox Library

Preview is public. A free SERNEM account is required to download the standard PDF.

Toolbox Topic

INDUSTRIAL RADIOGRAPHY (NDT) EXCLUSION ZONE TOOLBOX TALK

Duration

8–10 MINUTES

Date

Site / Area

Supervisor

Company

Participants

Document No

OBJECTIVE

✓

Prevent accidental exposure of personnel entering controlled areas during weld and piping radiographic NDT.

TOPIC EXPLANATION

✓

Industrial radiography may use X-ray generators or sealed radioactive sources. Ionising radiation cannot be reliably detected by human senses and a warning sign alone is not a control system.

✓

Only qualified and authorised specialists may undertake radiography under a site radiation protection plan, suitable instruments, source control and required permissions.

✓

Adjacent work, upper and lower floors, unlocked access points and hidden routes must be included. Only the responsible radiation team may confirm release of the area.

REALISTIC SITE SCENARIO

✓

A radiography crew did not fully secure an upper-level maintenance passage during testing.

✓

A worker from another team approached the controlled area unaware of the activity.

✓

Full access checks, joint SIMOPS communication and specialist area surveys would have prevented entry.

REMEMBER

✓

Never cross radiography barriers until the authorised specialist releases the area; do not attempt to handle a suspected faulty source.

KEY HAZARDS

✓

Exposure to ionising radiation.

✓

Unsecured entries into the exclusion zone.

✓

Uninformed workers above or below the work.

✓

Unauthorised entry.

✓

Incomplete surveys and monitoring.

✓

Source or generator malfunction.

✓

Poor simultaneous-operation communication.

✓

Premature release of the controlled area.

CONTROL MEASURES

✓

Use only competent authorised radiography personnel.

✓

Verify the approved radiation protection plan and site permits.

✓

Survey all adjacent areas, levels and access routes.

✓

Establish controlled boundaries using specialist measurements.

✓

Provide effective barriers, warning signs and access control.

✓

Notify neighbouring teams and shifts before work.

✓

Confirm specialist radiation measurements and dose arrangements.

✓

Apply authorised emergency procedures for source faults.

✓

Prevent any unauthorised boundary crossing.

✓

Accept area clearance only from the responsible radiation specialist.

SUPERVISOR TALKING SCRIPT

✓

Radiography boundaries are mandatory controls, not suggestions. Only specialists perform this work. Nobody crosses until the responsible radiography person confirms the area is released.

DISCUSSION QUESTIONS

✓

Who is the radiography supervisor?

✓

Which levels are inside the boundary?

✓

Are all entries guarded?

✓

Who responds to source trouble?

✓

Who can release the area?

PRE-WORK VERIFICATION

✓

Competent specialists assigned

✓

Protection plan approved

✓

Site permits checked

✓

All accesses reviewed

✓

Boundaries established

✓

Barriers and notices installed

✓

Adjacent teams informed

✓

Survey instruments suitable

✓

Emergency procedure known

✓

Release authority defined

ATTENDANCE AND APPROVAL

✓

Project / Site

✓

Date

✓

Presented by

✓

Work area

Attendance and Signature

#NamePositionSignature
1
2
3
4
5
6
7
8
9
10
11
12

Supervisor Signature

HSE Approval

SERNEM HSE Resource — Task-specific risk assessment, authorised procedures, manufacturer instructions and local law take precedence.