01MANDATORY
Pre-Work Planning
- ✓Verify the risk assessment and work permit.
- ✓Define the safe access and work method.
- ✓Barricade the area below and prevent unauthorized access.
High-Risk ActivitySafeBase Pro SeriesVerified 2026
SafeBase
Health and Safety Resources
Working at Height Critical Safety Rules
Plan • Prioritize Collective Protection • Prevent Falls
OSHA 29 CFR 1926EN 361 • EN 365 • EN 795ISO 45001 Framework
Document
SB-WAH-001
Revision 2.0
Scan
Checklists, toolbox talks and professional guides
✓
30 SEC CHECKSafeBase Pre-Job Control
Check Before Starting
✓Work Permit
✓Risk Assessment
✓Toolbox Talk
✓Rescue Plan
✓Weather
✓PPE Check
✓Area Isolation
02MANDATORY
Use Collective Protection
- ✓Use guardrails, platforms or suitable scaffolds first.
- ✓Protect openings with secure covers or barriers.
- ✓Do not start if collective protection is incomplete.
03MANDATORY
Full Body Harness
- ✓Inspect webbing, stitching and labels before every use.
- ✓Wear, fasten and adjust the harness correctly.
- ✓Remove damaged or fall-arrested equipment from service.
04MANDATORY
Approved Anchorage
- ✓Connect only to a designated and approved anchorage.
- ✓Verify a capacity of 22.2 kN per attached worker.
- ✓Select an anchorage above head level whenever possible.
05WARNING
Fall Clearance
- ✓Calculate free-fall and total clearance distance.
- ✓Prevent contact with lower levels or obstructions.
- ✓Minimize the risk of a swing fall.
06MANDATORY
Safe Access
- ✓Use inspected access equipment suitable for the task.
- ✓Maintain three-point contact on ladders.
- ✓Keep access routes clear, stable and unobstructed.
07WARNING
Prevent Dropped Objects
- ✓Secure tools using a suitable tethering system.
- ✓Store materials safely away from edges.
- ✓Isolate the area below and control access.
08INFORMATION
Rescue Readiness
- ✓Prepare a workable rescue plan before starting.
- ✓Ensure rescue equipment and trained personnel are available.
- ✓Verify emergency communication and response arrangements.
Critical Stop Criteria
🛑 Stop Work Now
×
There is no approved anchorage or fall protection
×
The harness, lanyard or connector is damaged
×
An unprotected edge or open hole is present
×
No rescue plan or response capability is available
×
Wind, ice or visibility conditions are unsafe
Technical Control
Critical Values
1,8 m
OSHA construction threshold
22,2 kN
Anchorage value / worker
100%
Continuous tie-off
3-POINT
Ladder contact
Reference
OSHA 29 CFR 1926.501 / 1926.502
EN 361 • EN 365 • EN 795
Personal Protective Equipment
Required PPE
⛑️
Chin-Strap Helmet
EN 397
🥽
Safety Glasses
EN 166
🧤
Work Gloves
EN 388
🥾
Slip-Resistant Footwear
ISO 20345
🪢
Full Body Harness
EN 361
Engineering controls first, personal protection second.