01MANDATORY
Assess the Hazards
- ✓Identify hazards and exposures before starting work.
- ✓Select PPE according to the risk assessment.
- ✓Reassess PPE requirements whenever conditions change.
High-Risk ActivitySafeBase Pro SeriesVerified 2026
SafeBase
Health and Safety Resources
Mandatory PPE Critical Safety Rules
Assess the Hazard • Select Correct PPE • Wear It Every Time
OSHA 1910 Subpart ISelection • Fit • InspectionISO 45001 Framework
Document
SB-PPE-001
Revision 1.0
Scan
Checklists, toolbox talks and professional guides
✓
30 SEC CHECKSafeBase Pre-Job Control
Check Before Starting
✓Risk Assessment
✓Mandatory PPE Signs
✓Correct PPE Selection
✓Fit and Compatibility
✓Pre-Use Inspection
✓Training and Instructions
✓Cleaning and Storage
02MANDATORY
Follow Mandatory PPE Signs
- ✓Check mandatory PPE signs at the work area.
- ✓Do not enter controlled areas without designated PPE.
- ✓Follow additional site and client requirements.
03MANDATORY
Select the Correct PPE
- ✓Verify that PPE is suitable for the hazard and task.
- ✓Check the product standard, protection class and limitations.
- ✓Ensure multiple PPE items remain compatible when worn together.
04MANDATORY
Correct Fit and Adjustment
- ✓Ensure PPE is the correct size for the user.
- ✓Adjust straps, buckles and fitting points correctly.
- ✓Do not use loose, excessively tight or ineffective PPE.
05WARNING
Inspect Before Use
- ✓Check for cracks, tears, deformation and wear before every use.
- ✓Verify labels, expiry dates and inspection status.
- ✓Do not use damaged PPE or equipment with doubtful protection.
06WARNING
Wear PPE Correctly
- ✓Use PPE according to training and manufacturer instructions.
- ✓Do not remove, modify or defeat protective components.
- ✓Do not remove required PPE inside hazardous areas.
07WARNING
Clean and Store Safely
- ✓Clean PPE using an approved method after use.
- ✓Store it away from sunlight, heat, chemicals and physical damage.
- ✓Disinfect shared PPE using a hygienic procedure.
08INFORMATION
Replace Defective PPE
- ✓Remove damaged or expired PPE from service immediately.
- ✓Reassess PPE after impact, chemical contact or an incident.
- ✓Do not perform unauthorized repairs or temporary fixes.
Critical Stop Criteria
🛑 Stop Work Now
×
Stop work immediately if required PPE identified by the risk assessment is unavailable
×
Stop work if PPE is damaged, incompatible or unsuitable for the task
×
Do not enter controlled or hazardous areas without mandatory PPE
×
Never remove, modify or defeat protective PPE components
×
Do not use PPE without training, correct fitting or required specialist testing
Technical Control
Critical Values
RISK
PPE selection is based on the risk assessment
FIT
Correct sizing and compatibility
EACH USE
Visual inspection before use
IMMEDIATE
Remove defective PPE from service
Reference
OSHA 29 CFR 1910.132
Personal Protective Equipment
Personal Protective Equipment
Basic Site PPE
⛑️
Safety Helmet
EN 397
🥽
Safety Glasses
EN 166
🧤
Work Gloves
RİSKE GÖRE
🥾
Safety Footwear
ISO 20345
🦺
High-Visibility Clothing
EN ISO 20471
Determine additional protection according to the task and risk assessment.