01MANDATORY
Pre-Use Inspection
- ✓Inspect rungs, side rails, feet and connections before use.
- ✓Do not use ladders with cracks, bends, loose or missing parts.
- ✓Immediately remove damaged ladders from service.
High-Risk ActivitySafeBase Pro SeriesVerified 2026
SafeBase
Health and Safety Resources
Ladder Critical Safety Rules
SELECT • INSPECT • SECURE • MAINTAIN 3-POINT CONTACT
OSHA 29 CFR 1926EN 361 • EN 365 • EN 795ISO 45001 Framework
Document
SB-LAD-001
Revision 1.0
Scan
Checklists, toolbox talks and professional guides
✓
30 SEC CHECKSafeBase Pre-Job Control
Check Before Starting
✓Work Permit
✓Risk Assessment
✓Toolbox Talk
✓Rescue Plan
✓Weather
✓PPE Check
✓Area Isolation
02MANDATORY
Select the Correct Ladder
- ✓Use the correct ladder type and sufficient length for the task.
- ✓Never exceed the ladder load rating.
- ✓Do not use metal ladders where electrical hazards are present.
03MANDATORY
Use Stable Ground
- ✓Place the ladder on firm, level and non-slip ground.
- ✓Never place ladders on boxes, pallets or temporary platforms.
- ✓Prevent the ladder feet from slipping or sinking.
04MANDATORY
Correct Angle and Securing
- ✓Use approximately a 4:1 setup ratio for leaning ladders.
- ✓Secure the top and bottom whenever practicable.
- ✓Ensure the ladder cannot move during use.
05MANDATORY
Maintain 3-Point Contact
- ✓Face the ladder while ascending and descending.
- ✓Maintain three points of contact at all times.
- ✓Use a tool belt or suitable method to keep hands free while climbing.
06MANDATORY
Do Not Overreach
- ✓Keep your body between the ladder side rails.
- ✓Climb down if the work cannot be reached safely.
- ✓Reposition the ladder before continuing the task.
07MANDATORY
Protect the Work Area
- ✓Barricade areas exposed to doors, vehicles or pedestrian traffic.
- ✓Lock or control doors where necessary.
- ✓Prevent the ladder from being struck or displaced.
08MANDATORY
Stop When Unsafe
- ✓Do not use ladders on slippery surfaces, in strong winds or unsafe weather.
- ✓Stop work if the ladder cannot be secured safely.
- ✓Use a scaffold or suitable access equipment when required.
Critical Stop Criteria
🛑 Stop Work Now
×
Never use a damaged or unidentified ladder
×
Never place a ladder on boxes, pallets or temporary platforms
×
Never overreach sideways while on a ladder
×
Never use a metal ladder near electrical hazards
×
Never continue when the ladder cannot be positioned safely
Technical Control
Critical Values
4 : 1
Safe setup ratio
0.9 m / 3 ft
Extension above landing
3-POINT
Continuous ladder contact
MAX LOAD
Do not exceed rated capacity
Reference
OSHA 29 CFR 1926.1053 / 1910.23
EN 131
Personal Protective Equipment
Required PPE
⛑️
Safety Helmet
EN 397
🥽
Safety Glasses
EN 166
🧤
Work Gloves
EN 388
🥾
Slip-Resistant Safety Footwear
ISO 20345
Full Body Harness*
EN 361
Engineering controls first, personal protection second.