Applies when: Fire is discovered or an alarm condition occurs

• ✓Activate the fire alarm immediately after discovering a fire.
• ✓Call the emergency number or site control centre.
• ✓Clearly report the location, fire type and known hazards.

Applies when: Evacuation is required

• ✓Use the nearest safe emergency exit.
• ✓Do not use lifts or return for personal belongings.
• ✓Proceed to the assembly point and report for accountability.

Applies when: Authorized extinguisher use

• ✓Select the extinguisher for the fire class and fuel involved.
• ✓Do not use conductive extinguishing agents on electrical hazards.
• ✓OSHA distance cards apply only where 1910.157(d) applies; check evacuation-plan exemptions.

Applies when: An incipient fire is to be tackled

• ✓Attempt only small, incipient-stage fires.
• ✓OSHA employee use: initial and at least annual education/training; only trained, authorized personnel may intervene.
• ✓Always maintain a clear and safe escape route behind you.

• ✓Verify the extinguisher is in place, visible and accessible.
• ✓Check the pin, seal, hose, pressure indicator and cylinder.
• ✓Do not use damaged, discharged or overdue equipment.

• ✓Prevent accumulation of combustible waste and unnecessary materials.
• ✓Store flammable liquids in approved containers and areas.
• ✓Control heat, sparks and open-flame ignition sources.

• ✓Do not obstruct exits, escape routes or fire doors.
• ✓Keep extinguishers, hydrants and alarm points unobstructed.
• ✓Never wedge open or disable fire doors without authorization.

• ✓Withdraw if the fire grows, smoke increases or visibility is lost.
• ✓Evacuate if the fire remains uncontrolled after extinguisher discharge.
• ✓Do not approach sealed vessels, cylinders or explosion hazards.