01REQUIRED
Identify Drop Hazards
- Identify tools, materials and loose items before starting.
- Check openings and edges at elevated levels.
- Consider wind and vibration effects.
← Poster Library
SRN-DO-001 • SERNEM Pro Series
Dropped Objects Critical Safety Rules
Selected size: A4
Use "Save as PDF" in the print dialog. No file downloads automatically.
HSE Field GuideSERNEM Pro SeriesSite validation required
SERNEM
Health and Safety Resources
Dropped Objects Critical Safety Rules
SECURE • ISOLATE BELOW • CONTROL MATERIALS • PREVENT DROPPED OBJECTS
OSHA 1926.501(c) / 1926.502(j)OSHA · US construction · Verify local requirements separately
Document · EN
SRN-DO-001
Revision 2.0
Content updated
Scan: open the digital poster library
SERNEM · Check Before StartingPre-Job Check
Loose tools
Suitable tool tether
Secured materials
Toe boards and screens
Drop-zone isolation
Team communication
Final area check
02REQUIRED IF
Secure Tools
Applies when: Tools can fall and a compatible system is available
- Use load- and tool-compatible tethering systems where required.
- Inspect tether attachment points.
- Do not use damaged tethers or connectors.
03REQUIRED
Secure Materials
- Keep loose materials away from edges.
- Prevent materials from tipping or rolling.
- Store small parts in suitable containers.
04REQUIRED IF
Barricade the Area Below
Applies when: Objects could fall into the area below
- Establish an exclusion zone beneath the drop line.
- Keep barricades and warnings visible.
- Prevent unauthorized entry.
05REQUIRED
Transfer Materials Safely
- Do not throw materials between levels.
- Use suitable lifting or transfer methods.
- Never drop materials from height.
06REQUIRED IF
Protect Openings
Applies when: Openings or exposed edges are present
- Use toe boards, mesh or suitable falling-object protection.
- Control platform openings.
- Immediately isolate the area if protection is removed.
07REQUIRED IF
Coordinate Overhead Work
Applies when: Work overlaps between upper and lower levels
- Maintain communication between upper and lower work teams.
- Assess simultaneous-work risks.
- Control work when personnel are below.
08REQUIRED
Final Area Check
- Do not leave loose tools or materials on platforms.
- Lower unused equipment safely.
- Remove barricades only after the hazard is fully eliminated.
Stop Work Now
NEVER WORK ABOVE WITHOUT CONTROLLING THE AREA BELOW
NEVER LEAVE TOOLS OR MATERIALS UNSECURED AT EDGES
NEVER THROW MATERIALS FROM HEIGHT
NEVER USE DAMAGED TETHERS
NEVER PERFORM UNCONTROLLED OVERHEAD WORK ABOVE PEOPLE
Critical Controls
SECURE
Control tools and materials
TETHER
Match the load and application
BARRIER
Isolate the drop zone
CHECK
Leave no loose items
Technical Reference · Validation Required
OSHA 1926.501(c) / 1926.502(j)
Verify source scope and local requirements
Risk-Based PPE Selection
Chin-Strap Helmet — Head-impact risk
Safety Glasses — Splash or particle risk
Work Gloves — Task-matched gloves
Safety Footwear — Ground and foot hazards
High-Visibility Vest — Traffic and visibility
Select PPE by risk, manufacturer and site procedure; this list is not mandatory for every task.
REQUIRED: work control · REQUIRED IF: binding when applicable · WARNING: hazard alert. Verify legal applicability separately.