Magnetic Drill Safety

Overview

Magnetic Drill Safety should be managed through a planned system of work: identify the task-specific hazards, eliminate exposure where practical, use engineered or collective controls before relying on PPE, verify critical safeguards before starting, and stop the task when controls are missing or conditions change. This guide applies those principles specifically to secure setup and controlled use of magnetic-base drilling machines.

Main Hazards

• • Loss of magnetic adhesion from poor surface condition or power loss
• • Entanglement with rotating cutter and swarf
• • Cuts, entanglement, impact or ejected material
• • Unexpected movement or stored pressure
• • Noise, vibration, sparks or airborne debris

Essential Controls

1. 1Prepare a clean flat ferrous contact surface and use secondary restraint where falling is possible.
2. 2Keep hands, loose clothing and cables away from the rotating cutter and remove swarf safely.
3. 3Use the correct tool, accessory and rated component for the task.
4. 4Inspect guards, handles, cables, hoses and safety devices before use.
5. 5Secure the workpiece and maintain a stable body position and clear work zone.
6. 6Isolate energy and release pressure before maintenance, adjustment or clearing jams.

Related Guides