Professional lifting operations inspection
Lifting Operations Inspection Checklist
Inspect lifting plans, crane setup, load details, rigging equipment, exclusion zones and communication controls before the operation begins.
Progress
0%
Compliance score
0%
Critical findings
0
Live safety status
WARNING
The lifting inspection is incomplete. Complete all applicable items.
Planning and Authorization
An approved lifting plan is available and matches the actual operation.
Critical—
The lifting supervisor, operator, rigger and signaler are trained and authorized.
Critical—
A pre-lift briefing has been completed with all involved personnel.
—
Load Assessment
The load weight, dimensions and center of gravity are confirmed.
Critical—
Approved lifting points are identified and suitable for the load.
Critical—
The load is stable and loose parts have been secured.
Critical—
Crane and Equipment
The crane or lifting equipment has adequate rated capacity for the planned lift.
Critical—
Crane, lifting appliance and accessory inspection certificates are valid.
Critical—
The crane and safety devices have been inspected and are in serviceable condition.
Critical—
Ground conditions are stable and capable of supporting the crane and load.
Critical—
Outriggers are fully deployed with suitable mats or support where required.
Critical—
Rigging Equipment
Slings, shackles, hooks and other accessories are correctly selected for the load.
Critical—
All rigging equipment has been visually inspected before use.
Critical—
Sling angles and resulting forces are within acceptable limits.
—
Hooks have functioning safety latches and are correctly connected.
—
Work Area Controls
A clearly defined and barricaded lifting exclusion zone is established.
Critical—
No person is positioned beneath or within the fall zone of a suspended load.
Critical—
Overhead structures, pipelines and electrical lines have been assessed.
Critical—
The lifting and load travel path is clear of obstructions.
—
Communication and Execution
A clear communication method and one designated signaler are established.
Critical—
A controlled test lift is performed to verify balance, rigging and brake function.
Critical—
The lift will not involve side loading, dragging or shock loading.
Critical—
Environmental Conditions
Wind speed, visibility and weather conditions are within permitted limits.
Critical—
Final Verification
The landing area is prepared, stable and clear before the load is moved.
Critical—
Inspection Summary
Live overview calculated automatically from the inspection responses.
Total questions
24
Answered
0
Yes answers
0
No answers
0
N/A answers
0
Completion
0%
Compliance
0%
Critical findings
0
Open actions
0
High / critical priority
0
Findings Summary
Corrective actions created from items answered No.
No findings recorded
Items answered No will automatically appear in this section.
Inspection result
Inspection incomplete
Answer every applicable item to complete the inspection.
Completed
0/24
Compliance score
0%
Critical findings
0